Are you looking for the ideal tree pulling rope to uproot unwanted, perhaps hazardous trees? In this information-rich review, we provide everything you need to make a decent investment. 
If you want the job done safely and with great results, showing up with the best rope for pulling trees is paramount.
Let’s get into it.
| Product & Features | Maasdam Pow’R Pull A-100 | Maasdam Rope Puller Kit | Twisted 3 Strand Poly-Dac Combo | YUZENET Braided Polyester Arborist Rigging Rope | Nylon 3-Strand Anchor |
| Diameter | ½ inch | ½ inch | Up to 2 inches | 3/8 inch | ½ inch |
| Length | 100 ft | Up to 200 ft | Up to 600 ft | 100 ft | 100 ft |
| Breakage Strength | 4818 lbs | 5594 lbs | 62,000 lbs | 3520 lbs | 6237 lbs |
| Leverage | 10:1 (rope puller) | 10:1 (rope puller) | N/A | N/A | N/A |
JUMP TO TOPIC
Best Rope for Tree Work
When choosing the best rope for tree work, various factors should be considered. It’s not enough to choose a rope because of its color or cost. A good tree pulling rope should provide little stretch and enough tensile strength to prevent breakage based on the work it’s intended for. You can hollow out the tree trunk afterward and add it to your garden.
1. Maasdam Pow’R Pull A-100
Quick Features:
- 100 feet in length
- A rope puller that holds an unlimited amount of rope
- High-quality polyester rope
- A rope puller with a max capacity of 1500 lbs
- The rope’s minimum tensile strength equates to 4818 lbs
- Non-slip hand clutch with 10:1 mechanical advantage
Do you need to fall a tree but cannot use a truck because of accessibility issues? This rope puller and rope combo is a force to be reckoned with when operating within constraints.
The tool’s ability to accommodate rope lengths of any size makes it ideal to pull and uplift trees from sizeable distances. This is because the rope puller doesn’t twine, unlike old cable come-along winches.
With a minimum breaking strength of 4818 pounds, it’s a decent rope for tree work, but should never be pushed beyond its breaking point.
The 10:1 mechanical leverage of the come-along is likely what adds to the rope’s strength. It’s a convenient combination when there’s insufficient manpower. When you need some serious pulling power but don’t have enough hands to go around, Maasdam’s come-along absorbs all the action.
With just a single person on the ground, a 10:1 mechanical advantage can be produced so that the work gets done. This is a small tool that isn’t afraid to fell big trees.
Let’s zoom in on the come-along’s non-slip grip. This is a huge factor to consider when felling, rigging or uprooting trees. While a new rope might be prone to slipping, this is not so with this come-along. You can perform your work without worrying about the thing coming loose.
Based on the experience of a faithful user, this seemingly insignificant puller and rope held enough force to pull a 4500-pound boat from the water. What’s phenomenal about his experience? He did the job singlehandedly, without assistance from anyone. Also, guess what? The rope didn’t break!
Overall: If you commonly work alone or with limited hands, pulling or lifting objects astronomical in size, and need sturdy tools to stand up to heavy objects, don’t just get yourself a rope. You also need a Maasdam rope puller to make things more enjoyable and stable while you do the job.
2. Maasdam Rope Puller Kit
Quick Features:
- Up to 200’ rope
- Three-strand polyester rope
- ¾ ton Maasdam rope puller
- Continuous loopie sling
This kit is a cool upgrade to the previous product. It’s a complete tool for arborists who wish to take their tree pulling business to the next level, especially with limited workmen.
The Maasdam rope puller is ideal if you have stubborn, ugly stumps sitting in your yard. These huge clumps of old, damaged trees add nothing to your lawn’s beauty. With help from a dandy rope puller, you can uproot stumps in no time, and without assistance from others.
This kit will also serve you well if you don’t have a truck to fell a tree, or simply don’t wish to use one. Pulling down a tree with a truck puts too much pressure on the rope, which could cause breakage. Using a puller removes that pressure, and gives you added leverage.
It’s a perfect match when used with a three-strand tree service rope but functions just as well with a 12-strand.
The loopie sling added to the kit gives more strength and stability when felling trees. It’s a knotless option, and with little manpower, it can be added to the base of the tree to provide additional support.
The loopie sling can be arranged at the base of the tree to provide different holds. For example, a choker configuration with a loopie may hold up to 4000 lbs, while a basket setup will more than double the amount. You can do so much heavy pulling with this kit. Attach a come-along hook to your loopie and you have a lot more pulling power to work with.
On the downside, the 12-strand loopie sling may be challenging to use. The hook used to secure the loopie to the rope puller is small. This makes it difficult to configure the loopie using a basket configuration, as it’s too thick to pass through. Either way, another configuration may be better suited, as the loopie can’t be doubled to pass through the hook.
By the way, this entire kit gives you a safe and powerful setup to rig and fell trees. Sure, you came to learn about the best rope for pulling trees, but sometimes you may need a bigger setup that ensures the job is done safely.
Overall: This kit comes equipped with various tools to improve your pulling power and stability when doing different types of tree work. The loopie sling and rope puller absorbs the load from the rope for pulling down trees and reduce the likelihood of it snapping.
3. Twisted 3-Strand Poly-Dac Combo
Quick Features:
- Strong, sturdy, and durable Polyolefin fiber
- Up to 2-inches in diameter
- Up to 600 ft in length
The beautiful color of this rope stands out at first glance. Vibrant white strands speckled with red blend well together, providing an appealing finish for the eyes. If you’re someone who loves to pull down trees in style, this might be your thing. Either way, the rope’s pristine color isn’t the reason it won a spot in this review.
The rope’s strength lies not only in its three-strand twists but its robust stretchy material. The interior was strategically designed with Polyolefin fiber and then coated with Poly-Dac as a protective cover. This adds double strength and durability, which makes it a strong rope for pulling trees.
Push, pull, and twirl as often as you will, this stuff was made for the long haul. Both materials enhance its durability, so if you’re looking for a rope that can withstand any climatic condition, mildew, and depreciation from the sun, this is one of the best ropes for pulling trees.
Let’s talk about the tree-pulling rope’s mass. While it’s tough and resistant to deterioration, it’s lightweight. You can carry it around effortlessly on your shoulders, without worrying about being bogged down by its weight.
This Poly-Dac combo rope goes up to two inches in diameter. The design carries a minimum tensile or breaking strength of 62,000 pounds. What does this mean for you? You have a lot of pulling power to work with.
Having this breaking strength leaves you next to unbeatable when tackling trees gigantic in height and mass. This is undoubtedly one of the best tree-felling ropes to have in your tree-felling kit.
At a minimum, pulling an object of this magnitude will not distress or cause the rope to snap. If you’re someone who’s not afraid to take on the job of pulling down huge trees, this trusted companion adds more confidence.
Overall: This rope is a powerful piece of equipment to fell trees with. Its material is long-lasting, and it can be exhausted without fracturing if kept within its maximum tensile strength. Because this can withstand so much load, this is one of the best ropes for pulling trees.
4. Yuzenet Braided Polyester Arborist Rigging Rope
Quick Features:
- Braided, premium polyester and nylon material
- 3/8-inch diameter
- 100 feet in length
- 3520 lbs breakage strength
This color-popping, dynamic rigging rope was created by YUZENET. The rope’s material was designed using superior polyester and nylon. It sports a dazzling yellow color and is dotted with black.
The rope is woven with nylon at its core and covered using polyester. This combination gives birth to a resilient and stretchy rope. The stretch of polyester and nylon is ideal for the purpose for which it was created.
By design, it is a tree trimming rope. Hence, if you’re looking to dismantle various parts of a tree, maybe branches that have grown out of control, this will do the job superbly
YUZENET’s colorful braided rope can be categorized as a dynamic rope. It’s best suited to absorb energy when a hefty branch is severed from a high altitude in a tree. This rigging rope will slow the rate at which the branch falls, and eventually stops the fall as resilience raises bit-by-bit.
If used for its intended purpose (rigging work), the material will not succumb to wear and tear.
For a rigging rope, the tensile strength is superb. However, if you ever choose to branch out and use it as a tree pulling rope, you might encounter a problem. With a breakage strength of 3520, expect this rope to break in no time. This is potentially dangerous, so be sure to get a rope that’s designed to stand up to heavy trees.
Again, this was designed as a tree trimming rope, so if it does stand up to a small tree felling job, you’ve struck gold.
Overall: A great rigging or trimming rope to have on hand. The material is rich in stretch and resilience, which does a great job of breaking the fall of branches or limbs falling from very tall trees.
5. Nylon 3 Strand Anchor
Quick Features:
- 100% nylon material
- Breakage strength of 6237 pounds
- ½-inch diameter
- 100 feet tall
This white, ½-inch diameter rope is made with 100% nylon. This increases the rope’s resilience and elasticity. Again, another superb option for a tree trimming rope.
In comparison to other materials used to weave or twist ropes, 100% nylon is considered a heavy-hitter. It’s water-resistant, which doesn’t attract decay from mold and mildew. It is tolerant to mechanical wear, which means you’ll be using this rope for a long time if used for its intended purpose.
Although suitable for rigging work, it can be used as a tree pulling rope, but care needs to be taken. It will stretch a great deal when used to pull trees (which isn’t necessarily a good thing).
When pulling down trees, the rope needs to stretch only a little, which is why most arborists go for a static rope (something along the lines of static polyester or high-tension polyester). This, on the other hand, is a dynamic rope and will likely allow too much stretch.
It can be used with a rope puller to draw tension away from the rope, but with a break strength of 6237 pounds, it’s not really suited for felling tougher, heavier trees. Once the rope stretches too much, a hazardous situation can occur and result in it snapping.
Overall: This is a decent option for tree trimming rope, although it can be used to pull down trees and move different objects around, like a boat.
The nylon material gives it sufficient stretch to increase the rope’s resilience and lessen the impact of branches falling. Either way, it can be used to lean a tree in the intended direction.
Final note:
The “twisted 3-strand Poly-Dac combo” is the best rope for pulling trees. However, if you’re looking to handle robust projects, sometimes with little help, getting the Maasdam rope puller kit is not a bad option to consider.
