How to remove overgrown shrubs is a possible task, as long as you do it properly, as it depends on how you like to do things and the availability of tools. Removing an overgrown shrub in the yard can possibly be done through careful planning and preparation.Remove Overgrown Shrubs

Whether you decide to do it manually or with the help of heavy equipment and other paraphernalia, plan it carefully to avoid any mishaps and to have a satisfactory outcome for your shrub removal.

So, whether you will be doing it alone or with some help, let us first find out how the removal of overgrown bushes and shrubs is done, so read on to find out how.

How to Remove Overgrown Shrubs the Right Way?

To remove overgrown shrubs the right way, you must pick the right time and prepare the needed materials and tools. Then, examine the shrub very well, trim off the branches and the trunk, loosen the soil, and dig the roots. Lastly, level the ground, and dispose of the cut material.

For instance, if you have no truck to pull out large shrubs, simply cut it down to a minimum height of 10 inches to 20 inches. It may take you several hours to finish it, especially if your shrubbery is in a large area.

1. Pick the Right Time

Summers and winters are not an option, so you must avoid them at every cost; given that this is laborious work, and you will be spending lots of hours outside in the sunshine, do not schedule it in the summer. On the other hand, if you choose winter, it is difficult to dig the frozen ground in winter, so it could be better. Depending on your area, plan this task at your most convenient time and season, so make sure you do so in spring or fall.

2. Prepare Your Materials and Tools

As you aim to go ahead and remove the shrub, you must ensure that you have the best tool for digging up bushes, which is one way to guarantee that the job is done efficiently. Also, cutting and trimming materials are needed to cut the bunch of shrubs serving as an eyesore in your yard.Best Tool for Digging up Bushes

Pruning shears or loppers and knives can be used to cut the smaller and thinner branches of shrubs that seem to spread widely. Meanwhile, you should also have an ax or chainsaw as they would be ideal for the trunks and other large branches.

Mattocks and hoes can be used to loosen the ground surrounding your bush plant, whereas shovels can help you dig up the soil. An ax, a hack saw, or other similar tools can be utilized to cut the thicker roots under the shrub.

Ensure each tool has been sharpened, and the cutting edges are whetted. Not doing so can hamper your task on hand, resulting in a prolonged cutting process, which could have been done in approximately two to five hours, on the bulkiness of the shrubbery that you want to remove. A portable climbing ladder is also helpful to be able to reach the boughs on the upper part of the trunk. In addition, a hose and water may be necessary, especially when you carefully pull the bush down to its roots.

3. Examine the Shrub Well

To remove an excessively grown shrub is a matter that depends on your end goal, shrubs that are overgrown may or may not be removed. A change in landscaping and the prevention of the destruction of property, like fences, are a few of the reasons why homeowners remove large and excessively growing shrubs. Making sure that you examine it will help you in a prolong way, as you must do so before you begin trimming it.

Yet, if you want it removed because it’s becoming ugly, why not prune it to whatever design you want first? After a few days, go back to your shrub, examine it closely, and decide whether you want it removed. In short, you must know how it grew, because shrubs are usually smaller in size compared to a tree, but when they are neglected, or have a lack of pruning, and the lack of any maintenance are just some of the few reasons why shrubs become overgrown, and even become contaminated by diseases.

Another reason might be that the shrub is placed in an advantageous location with good sunlight, soil, and nutrients, which could cause it to grow fast. When not managed properly, it can become overgrown and overwhelming, so you must be aware of it, as you would have to know where to start.  If they are planted too close together or near walls and fences, they may need more room to expand, leading to overcrowding and overgrowth.

4. Trim off the Branches and the Trunks

With pruning shears or knives, chop off the wayward branches of the shrub one by one. This is to tidy it up and move more freely when you tackle the lower part of the shrubs. You cannot let the twigs and limbs of woody plants poke while doing this job.Trimming Shrub Branches

Even though shrubs are less than 15 feet tall, reaching the higher branches could be challenging when one needs more height. First, chop off the branches at the topmost portion of the bush, as removing them will make the heavy shrubs lighter. Using a portable ladder can also help cut branches on the higher portion of the plant, and try to start pruning to make it smaller.

Meanwhile, having a handy chainsaw is a big help when cutting thick branches in the innermost portion. It doesn’t only make the work fast, but it will also enable you to make neater trimmings, not that it is a requisite. Just make sure that you are securely protected and safe to avoid hazards while doing the shrub removal.

When cutting the trunk, you can either leave at least 20 inches of the trunk above the ground for easier grasp when you opt to pull it out, or you can trim it down up to the ground level and let nature take the course of decomposing the remaining stump.

5. Loosen the Surrounding Soil

In this case, you must now begin to loosen the soil, if you want to pluck all of the shrubs down to their roots, then loosening the soil is a must. Dig up the surrounding soil with a mattock or a hose to slacken it. Gradually, it causes the roots to detach from the ground. When lesser or no roots are anchored, it makes the removal of the shrubs easier and much faster.

During the loosening of the soil, be reminded of the utilities underground, and be aware of their location so that you can avoid hitting them with the mattock. A pointed shovel can be used in areas where there are pipes lying in, but use it only with careful attention.

6. Dig the Roots

After loosening the ground, dig out the turf surrounding the stump with a shovel. Do so until all the roots are exposed; by then, you can easily cut the side roots. Now, you can aim and try cutting as many roots as possible to prevent the stump from reconnecting or even re-growing.

7. Pull Out the Stump

When the roots no longer hold the stump back, you may pull it out using your bare hands. However, this may depend on the size and the number of trunks or stumps to be removed. If a queue of shrubs needs to be removed, pulling out all the stumps can be harder work for you, in the longer run.Pulling out Garden Stump

Many garden owners have pulled out stumps without any hassle by using their vehicles as they hold them with a chain. Simply, tether one end of the chain tightly around the trunk while the other end is securely fastened into a car or a truck. Then, drive the vehicle, eventually dragging the stump along as it moves away.

8. Level the Grounds

The location where you remove some bushes may contain hollow and recessed areas. As it is now not leveled to the rest of the grounds, you need to flatten it. Whether you are planting another garden or landscaping the area, it is wise to level the grounds right after.

This is to avoid any accidents that can occur when one walks in an uneven area. Now, you should try to fill in the unfilled areas with the earth you gathered nearby, or just distribute the disturbed soil evenly with a rake or a shovel, so the hole that is now left wouldn’t cause any aesthetic issues.

9. Dispose of the Cut Materials

The cut leaves and branches must be disposed of right after to avoid messy yards; otherwise, regrowth may happen, especially when cut branches are left in contact with the earth. With the right amount of soil, sunlight, and moisture, it is not impossible for sprouts to appear in a few days despite neglect.Disposing of Plant Waste

Others shred the shrub debris and include it in their compost, and meanwhile, others just throw the cut materials in a nearby lot and leave it there to decompose. Spray it with herbicide, and then leave it for a few days.

When it becomes wilted and dried, you can more easily pull it with the help of your truck. Be careful when using the herbicide, though, as it may affect nearby plants and could be harmful to the surroundings.

Conclusion

Whether you want a new landscape or your shrubs are climbing on the property line, to remove shrub from your yard is not an insurmountable task; as long as the steps given here are followed, you’ll be able to remove bush and shrubs in no time.

  • Preparation is key when you want to remove overgrown bushes in the yard.
  • Cutting tools like pruning shears and knives and digging tools like shovels and hoes are mainly used for this task.
  • Minimize the shrub by cutting its branches and leaves, then leave a 20-inch stump.
  • Depending on their size, stumps can be pulled by hand or by using a vehicle.
  • Shrubs that become overgrown need not be removed altogether; rejuvenate pruning can be done, too.

Now, you already know how to remove those overgrown bushes and how to remove bush stump. You might be a beginner in this yard-cleaning and bush-removing pursuit, but we know that you can do it easily.

5/5 - (16 votes)
Evergreen Seeds