How to use water globes for plants is confusing in several minds, but once you get the right hang of it, it is doable. These tools, meant for plant watering, are made of blown glass and are thus known to be fragile.

Using Water Globes for Plants

This detailed guide gives instructions on how best watering globes could be used. Read on as we provide you with information to ensure you get the most out of this option to hydrate the plant.

How to Use Plant Water Globes?

To use water globes for plants first you must prepare them, and fill them with water, and then place them into the soil. After doing so, you should compact the surrounding soil, and monitor the plants, and lastly, check and refill the globes.

Plant water globes,or watering spikes, can be used by plant lovers to hydrate plants. These self-watering globes can be a challenge to use as they are made out of fragile glass. They contain water and are directly inserted into the soil, where they slowly hydrate the soil.

– Step 1: Prepare Your Globe

You could procure a plant watering globe set from stores such as Wyndham House, Blazin’ Bison, or they would also be available from some online retailers too. After the brand-new aqua globe has been removed from its packaging, it must undergo a brief but straightforward preparation.

Preparing Globe For Plants

Now, Turning it upside down so that the stem is facing up and using water from the tap or safe water source in your home to give it a good rinsing may help you remove any dirt or other particles that may have become lodged inside. This is because you wouldn’t want to use it if it isn’t washed properly.  

After giving it a few good stirs and filling it with water until it is approximately half full, discard the water to empty the container. You can also have your DIY watering globes by using an empty bottle with a small narrow neck that is long enough, such as wine bottles. In addition, you could get innovative by using small multi-color glass watering balls.

– Step 2: Fill It With Water

To provide the plant with moisture, so you must now fill the globe with water. In order to protect against any kind of contamination, it is recommended to use water that has been filtered

Filling Globe with Water

Additionally, the opening of the globe will be constrained and narrow in size; thus, you will need to pour the water in with a pitcher that has a spout. You should fill the globe until it is approximately three-quarters full, which is equivalent to reaching the middle of the stem, but it should not be totally full. 

– Step 3: Place Your Glass Watering Globes Into the Soil

Be sure to give your plant a thorough supply of water before continuing with the process of inserting the globe. By doing so, there will be a significant slowdown in the rate at which the water evaporates when you use the globe. 

Watering Globes Into the Soil

The next step requires you to set the globe into the soil carefully. While inserting it into the soil, you should not just push it deeper into the ground since doing so will create pressure, and as a result, the plantwatering bulbs <span style=”font-weight: 400;”> may become damaged or develop a fracture. As a result, you should be careful in this step because you wouldn’t want to harm the globe.

To guarantee that the globe is placed in the appropriate location, you will first need to use a thin stick to make a hole in the ground. Making a hole will also prevent the globe from becoming clogged. After this has been accomplished, move quickly to invert the globe and insert it in the opening. It must penetrate the ground opening entirely before it can stand up. 

– Step 4: Compact the Soil Around

Compact the soil around the hole in the globe’s spout to prevent it from falling or even tipping over. To avoid the watering globes from becoming top-heavy after they have been inserted, it is necessary to pull the soil closer around the container’s narrow neck. 

If the globe is going to be kept indoors or is going to be in a container, you should use a large and heavy pot so that it can support the weight of the top-heavy water globe. This is a key step to consider because the globe shouldn’t be in a vulnerable position, as the water in it is already keeping granting it some heavyweight, so the pot should be big enough to handle this. 

Soil Around Globe

When you first do this, it is perfectly normal for there to be some water that leaks out onto the ground. Do not be alarmed by this, as the soil will prevent the water from completely escaping the watering globe at some point in the future. The reason why it should be compact is that when it is aerated, the water will flow much more freely, but when you have compact soil, it will stand still and do the job right. 

– Step 5: Monitor the Plant

After the watering globes for outdoor plants or indoors have been set up, you will still need to watch the plant to ensure its functionality serves its purpose. You will run out of water over time and refilling is needed for the watering globes work properly. 

Monitoring the Plant

Moreover, you will also have to clean the globe regularly, particularly if you notice any debris, soil particles, or even some algae floating inside it. There could be an obstruction in the neck of the globe and when this occurs, you can use a cotton bud or a small pipe cleaner to loosen the debris and then rinse it away.

Alternatively, you could also clean the globe by scrubbing it with dishwashing detergent, a mixture of baking soda and warm water, or a combination of baking soda and lemon juice, then allowing it to dry before reusing.

– Step 6: Refill the Globe

How long do watering globes last and the rate at which they empty varies on the soil in your yard, but the average timespan of a small plant watering bulb is approximately seven days, while the average lifespan of a large one is about two weeks. The drainage rate is primarily determined by the texture of the soil, the type of plant, as well as the size of the draining holes of your container. Moreover, it would also be due to the plant variety and the temperature surrounding the plant, because in spring time, it would need more water than of winter time. 

Remember that you must not use a watering globe that is too large, as there is a possibility that your plant will receive an excessive amount of water. Nevertheless, remember you will need to replenish the globes at least once every week or two to maintain the plants’ well-being.

Refill the Globe for Plants

Apart from saving time in the regular watering of the plant, the globe also moderates the amount of water given to the plants. The advantage of aqua globes is that it helps maintain a constant soil moisture level and plants watered with globes would be hydrated throughout without the soil ever going dry. 

This is an excellent choice for moisture-hungry plants like ferns, but are watering globes good for succulents? No, it is not suggested for succulents and other plants that prefer to become dry in between watering sessions. 


You have now understood how to utilize watering globes to ensure that your plant receives a consistent amount of water.

Read on for a summary of all the information discussed in this article.

  • You can water plants with the help of plant water globes. These are fragile in nature, made of glass, loaded with water, and planted straight into the ground, where they slowly hydrate the ground.
  • Filling the globe with water will provide the plant with the needed moisture. Using water that has been filtered is strongly encouraged to protect plants against any form of contamination that may occur.
  • You shouldn’t just push it forcibly deep into the ground after inserting it into the soil because doing so will create pressure. As a result, the plant watering bulbs may become damaged or develop a fracture.
  • To ensure that the globe is placed in the correct spot, you will first need to use a thin stick to drill a hole in the ground, and this will ensure that the globe is placed in the correct location.
  • Over time, the water in the globe will evaporate, and for the watering globe to continue its function, it will need to be replaced with new water. In addition, you will need to clean the globe regularly, mainly if you observe any floating debris or algae inside of it.

Having gained an understanding of the procedures, you can now incorporate these simple bulbs to maintain your plant’s healthy nourishment. Don’t put it off any longer; acquire them, and you’ll soon notice that your plants are thriving and adequately hydrated.

5/5 - (5 votes)