Monstera Pinnatipartita Care InfographicThe Monstera Pinnatipartita is a very rare plant that originated in South America and is native to Peru, Colombia, and Ecuador. The beauty and charm of this plant captivates the attention of plant growers, especially monstera lovers.

The leaf transformation of this Monstera Pinnatipartita variegated plant from being a younger plant to its mature appearance is very interesting. Let’s find out how this plant captured the eyes of many and discover how to properly care for and grow this intriguing plant. 

What Is a Monstera Pinnatipartita?

A Monstera Pinnatipartita originates from South Africa, it is a green Monstera plant with greenish stems and aerial roots, that grow from its nodes. The leaves of a juvenile Monstera Pinnatipartita have a rough and leathery texture with a variation in color than includes green and light green.

Monstera Pinnatipartita Care

Taking care of Monstera Pinnatipartita is very simple and easy, yet it requires proper attention and care. Even an amateur monstera grower can produce a beautiful monstera by consistently following all the requirements outlined below.

– Water Requirements

As a general rule, always inspect the soil before watering your Monstera Pinnatipartita and other monsteras. Nonetheless, it is important to know that one good recommendation is to ensure that the soil is completely dry before watering the plant.

When watering the Monstera Pinnatipartita, you will have to consider different factors: the light your monstera receives, environmental humidity, plant size, and temperature exposure of the plant.

It is recommended to water mature Monstera Pinnatipartita plants only occasionally. Normally, Monstera Pinnatipartita prefers to be watered once a week. If your monstera is located in a warm environment in which the soil is usually moist, it is advisable to water your plant at least twice a week.

It is also important to establish a routine for you and your Monstera Pinnatipartita so you have a watering schedule to follow.

Pinnatipartita Monstera Plant on pot

– Light Requirements

When growing Monstera Pinnatipartita, low light is tolerated. However, you should also consider that having very limited sunlight can affect the plant’s growth and make its leaves darker and sparse.

Directly exposing the plant for a long time under the sun is also not a good option as this could burn the monstera pinnatipartita leaves. There should be a balance of light, neither too much nor too little, to help the monstera grow fast and healthy. Keep in mind that bright but indirect light is what a Monstera Pinnatipartita needs

Then again, in the case of Monstera Pinnatipartita, bright light is the best condition to consider. Exposing the monstera plant to very low light conditions would slow it quickly, unlike when it is exposed to bright light.

Nevertheless, limited indirect sunlight might be fine if you do not want your plant to grow big very quickly. Just like for other plants, keep in mind that light is very important when growing monstera because this is where the plant gets its energy, which means the more light the plant receives, the faster it will grow.

Follow some tricks to make your monstera grow healthy and fast. Every morning, place the monstera plant in a bright area for an hour. Alternatively, you can just keep your Monstera Pinnatipartita in a place where it can receive moderate indirect sunlight. You can also use a totem pole to support the plant.

– Soil Requirements

Another important thing to consider when planting a Monstera Pinnatipartita is the soil to prevent future plant problems like tearing, drooping, and yellowing of the leaves.

It prefers humid soil. The soil must be well-drained and properly ventilated. Correctly choosing the right kind of soil can help to easily drain excess water and thus prevent the overwatering of the plants.

The Monstera Pinnatipartita requires potting soil that is rich in organic matter. You need bark bits, compost, mulch, and even better, animal dung. This could help the plant grow properly and beautifully.

– Temperature Requirements

The Monstera Pinnatipartita can only tolerate average temperatures between 65 and 80 degrees Fahrenheit. They will grow actively at this level of temperature, but when it falls below this range, the Monstera Pinnatipartita will completely stop growing.

– Humidity Requirements

The Monstera Pinnatipartita loves humid environments. The required level of humidity for this plant is around 60 to 80 percent. There should be enough humidity to prevent the leaves from becoming brown and have crispy tips. Very low humidity causes wilting, drying, and yellowing of leaves and other leaf problems of the Monstera Pinnatipartita.

Some monstera growers use a digital hygrometer to track the level of humidity in the area. There are some other ways to increase the humidity levels of a place or a room: buying a humidifier, regularly misting the plants, grouping them with the other planes, and placing them on a pebble tray.

– Fertilizing Requirements

The Monstera Pinnatipartita growth rate is active during summer and spring. During these times, a gentle liquid fertilizer is the most advisable to feed your monstera. Nevertheless, plant growers have the option to stop fertilizing the plants during winter and fall. 

According to some expert plant enthusiasts, Monstera Pinnatipartita tends to grow in spurts all year round. To support this growth, fertilize the plants once a month or in all of the colder months. There are also some recommendations online for monstera plant food based on different varieties. 

– Pruning Requirements

Pruning and grooming are very important in taking care of the Monstera Ppinnatipartita as these will give way to new growth, enhance health, and give new looks to the plant by cutting off all the dry and dead leaves. The monstera owners can also prune some branches to control the size and the shape of their monstera according to their desire.

The growing season of the monstera pinnatipartita is the best time to prune the plants. You will be needing a knife or pruning shears; make sure that they are sterilized before using.

Lastly, please make sure to keep in mind that in order to make sure that you are not attracting pests, look for a damp cloth, and slowly wipe the leaves to eliminate the dust and dirt.



There are two popular methods of propagating Monstera Pinnatipartita: tip cuttings or stem cuttings, both in soil and water. Eventually, your Pinnatipartita will grow some aerial roots that will help in the propagation of the plant. Any of these methods are possible; it will only depend on you as a plant grower on which one you prefer.

– Propagation From Tip Cutting in Soil

First, begin by pouring the potting mix into the pot, then water the pot until the remaining excess water drains. If there is remaining water in the saucer, immediately discard it. Then, Pick a well-conditioned stem that has at least two nodes, and cut it in about four to six inches.

Remove the lower leaves, letting the upper one or two leaves unremoved. Additionally, it would be proper if you get rooting hormones, and apply them. Try poking the potting mix using a stick or your finger, and then gently plant the Monstera Pinnatipartita’s stem cutting. Take a look at the nodes, and make sure that you had covered at least two of the plant’s nodes.

Now, apply a light spray on the plant, cover it with a plastic bag then securely seal it. It is advised to place the plant in a bright place that has indirect sunlight and has a room temperature of 70 to 75 degrees.

Allow the plant to breathe by removing the plastic cover from time to time. Also, spray the plant with water from time to time to keep the soil moist. The plastic cover will help the plant maintain the right level of humidity. Lastly, after four weeks, the roots will begin to grow, and the first bud of the plant will eventually show after eight weeks.

– Propagation in Water

There isn’t much difference between water and soil propagation, other than placing the plant in a water jar instead of placing it in a potting mix. However, remember not to drown the leaves of the plant. It is advised to change the water after three to four days.


Like every other plant, the Monstera Pinnatipartita also has some common problems to deal with, but with the right amount of effort and technique, plant growers like you could easily restore the beauty of the monstera plant. Check out the early symptoms, preventions, and treatments below.

– Yellowing of leaves

The most common problem of Monstera Pinnatipartita is the yellowing of leaves, and the main cause of this is overwatering. Always remember that when you start to see the yellowing of the plant’s leaves, check the soil. It is important that you always check the soil before watering the plant.

– Curling Leaves

Curling leaves on a Monstera Pinnatipartita is an indication of overwatering and even underwatering of the monstera plant. Having proper knowledge of the watering of the monstera plant is very important. Exposing the plant to too much light, very high temperatures, and infliction with the disease also cause leaf curling.

– Brown Edges

When Monstera Pinnatipartita is exposed to direct sunlight, the plant will develop brown and crispy edges on the leaves. Nonetheless, if this takes place, transfer the monstera plant to another location, and water it frequently.

– Dropping of Leaves

The dropping of leaves of the Monstera Pinnatipartita is a result of improper care and poor growth of the plant. The main cause of this problem is underwatering, and sometimes, even overwatering and low humidity.

– No Splitting of Leaves

Insufficient light is the main cause for having no splits on the leaves of the Monstera Pinnatipartita. Always remember to check the light being received by the monstera plant. Bright and indirect sunlight is recommended, and it is a big no for direct sunlight.

– Root Rot

Root rot is a fungal infection that can be experienced by Monstera Pinnatipartita because of overwatering, wrong draining of soil, and lack of oxygen to the roots. Root rot is also a monstera disease. We cannot easily identify root rot unless the leaves and stems show symptoms. Avoid overwatering the Monstera Pinnatipartita to prevent this.

– Pests

Mealybugs, scale, spider mites, and thrips are the most common pests that attack monstera plants. These pests do not directly affect the monstera plants. However, they become a problem when their population increases. They weaken the plant because they steal water and nutrients.

Get rid of them as early as possible by spraying them off with water. For small Monstera Pinnatipartita plants, use the sink to remove them all from the plant. If you have bigger monstera plants, a garden hose outside is best to use to remove all the pests.

Don’t forget to check all the spots. Make sure to wash off the adults, larvae, and eggs so they won’t come back.

– Diseases

Any diseases like fungal and bacterial infections affect the Monstera Pinnatipartita or any kind of plant. They usually attack the plants’ roots and leaves.

Abnormality in the leaves of a monstera plant-like stripes, deformed and yellowing leaves, spots, and mosaic patterns are indications that something is wrong with the plant.

– Overwatered

An overwatered Monstera pinnatipartita will show some indicators. The soil will become soggy and wet. The plant will show some wilting, a mushy stem base, leaves that are yellowing and falling, and some brown spots. Usually, this is an indication that the roots of the monstera plant are rotting.

The lack of drainage holes, heavy soils in oversized pots, or even watering the plants too frequently can cause a monstera plant to be overwatered.

To prevent monstera plants from being overwatered, you must consider having a consistent watering schedule. Consistency is very important.

You also have to remember that the watering of monstera plants will depend on different factors like the humidity and container size used for the plant. The monstera regularly needs watering once a week, but when the monstera shows new growth, it will require more frequent watering.

You have to check for proper drainage. It is a must to check that excess water is drained. Thus, you have to consider the holes when buying a pot for your monstera plant. You also have to be vigilant. Observe the signs like soggy soil and yellow leaves. Take action immediately before your monstera plant gets harmed.

Underwatered Monstera Pinnatipartita

An underwatered Monstera Pinnatipartita will show undersized growth. The leaves of the plant will start curling, and the soil will become dry. Another indication that your plant is being underwatered is that it will be losing leaves and exhibiting drooping and wilting.



– How Do I Save an Overwatered Monstera?

 Make sure that the plant was indeed overwatered. Take the plant out of the pot to inspect it, and see the damages caused by the overwatering.

Overwatering of plants causes the plant’s roots to rot, so the issue will mostly start from the soil and will damage the leaves soon after. As the soil is overwatered, you must replace the soil with a new, dry potting soil mix. Remove as much wet soil from the roots as possible in a cautious way. 

It is recommended to cut all rotten roots and dead leaves so that the damages will not repeat or spread. This will also allow your plant to have healthy growth. Put the plant back in the pot. You must look out for two things when replacing the potting mix. 

First, always make sure that the pot has fine drainage holes. Second, use a well-draining mix. Before taking care of the plant, see if the plant is actually in a good spot first. Overwatering can be an effect of insufficient light or temperature that is too cold. 

Slowly reintroduce watering to your monstera. Be careful, as the roots are still sensitive and recovering from trauma. Always inspect the moisture of the soil before watering the monstera plant to prevent overwatering again in the future. After following all the instructions given, the last thing to do is to observe for any changes and improvements in the monstera plant over the next few weeks.

– How Do I Repot Monstera Pinnatipartita?

The potting of Monstera Pinnatipartita can be classified into either one of two variants: climbing or trailing. If you choose the climbing variant, prepare something that can support the plant, such as a larger container and a trellis. It can be in the form of a long wooden stick or a moss pole.

The best time for repotting is the growing season, and since Monstera Pinnatipartita grows quickly, repotting can help the plant be healthy. It is recommended to repot every two years or when the plant shows signs of being root-bound.

Choose the right measurement of the pots; two to three inches wide in diameter is recommended, and it should be deep, with drainage holes at the bottom that are at least two to three inches larger than the monstera’s root ball. This could help prevent the overwatering of Monstera Pinnatipartita.

Be careful when repotting the Monstera Pinnatipartita, as it can overstress the plant. Such conditions can result in some unhealthy and unpleasant effects on the plants.


We have covered a lot of insights and reminders on how to properly take care of your Monstera Pinnatipartita. Let’s review what we have learned about how to become a successful Monstera Pinnatipartita grower.

  • The Monstera Pinnatipartita is a very rare plant native to South Africa, yet it is easy to take care of and grow.
  • An issue that this plant would face would be the yellowing of its gorgeous leaves, and the main cause for this would be due to overwatering it.
  • The best time to repot the monstera Pinnatipartita is during the growing season, in addition, remember to repot it every two years.

The Monstera Pinnatipartita is such an amazing plant. Why not try to grow one, and be a proud monstera grower!

5/5 - (18 votes)
Evergreen Seeds