Plants that look like peas or peapods are not actually edible like peas, but they can be planted for ornamenting your garden or the interior of your house. There are a few different types of succulents that resemble peas or peapods, and you might be wondering how can you learn about them.

Plants That Look Like Peas

Don’t worry about it because today we have brought you this list of plants that look a lot like peas or peapods, and you can grow them with ease. Check the descriptions of these plants below to learn more about them.

List of Plants That Look Like Peas and Peapods

1. String of Pearls

Senecio Rowleyanus is the scientific name for the String of Pearls plant, which mimics peas. It is a deciduous watery vine of the evergreen family that is native to arid parts of southwest Africa. Its stems generally trail over the ground to three feet or more in length, with roots at the nodes to produce a dense spreading ground cover.

– Features

It is notable for its distinctive, nearly spherical, small pea-shaped modified leaves, which store water, reduce water use, and overall aid plant survival in arid regions. Each leaf’s core is made up of water-holding cells. In the summer, this plant’s stems are covered in white, daisy-like discoid blooms. The structure of the flower is identical to that of crocuses.

Cinnamon scent pervades the flowers. This is a beautiful decorative vine that is nearly typically cultivated in hanging baskets to highlight the elegant suspended stems and gray leaves that drip down from the container rims.

This shrub may be cultivated in a shallow dish in a way similar to its natural trailing growth pattern and must be moved indoors before the first autumn frost date in colder locations.

String of Pearls

– Growth Requirements

This plant grows best in part shade in a dry, gritty, well-drained Ficus potting mix, on another note, you must also allow the roots to clean out between watering sessions.

It can resist long periods of drought and tolerates occasional irrigation. You should avoid badly-drained and damp soils, which will surely result in root rot, although this plant is unfazed by excessive humidity.

Not only this, but you must also make sure that the plant grows best in temperatures between 75 and 55 degrees Fahrenheit in the summer and 55 degrees Fahrenheit in the winter.

You should try repotting this shrub every spring, and bear in mind that after a few years, it may be advisable to take clippings and start anew rather than trying to resuscitate the established plant. Stem cuttings are an easy way to reproduce this plant.

2. Button Plant

Dischidia Nummularia, sometimes known as the Button Plant, is an epiphytic tiny spreading tropical succulent plant with trailing branches that is related to the Hoya. This plant can grow on tree stumps or branches as supports.

– Features

Because its hard, spherical leaves resemble long strands of pennies, the Button Plant is also known as the String of Nickels. It does, however, resemble peas and has small, opposing lens-shaped leaves. It is commonly spotted on tree trunks, resembling a slew of dangling necklaces on branches.

Despite its tiny yellowish-white blossoms, it is commonly found in cultivation. Their stems may form roots mostly along nodes to collect nutrients and water while also providing additional support to the plant.

– Growth Requirements

Butterflies, bees, and birds are drawn to this plant, because it has a property that would attract pollinators, which would help it in the blooming seasons. Indoors, it should be grown in medium to brilliant screened light or with a lot of artificial light.

Button Plant

Because the Button Plant requires high humidity, spray it every day or lay the pot on a tray filled with stones and water. The water evaporates and moistens the air, while the stones keep the delicate roots dry.

It must be planted in a free, well-draining soil suited to epiphytic plants. This plant prefers the safety of a small container, and seedlings that are a little root-bound will blossom more profusely than ones that are floating around in a large pot.

What you must keep in mind is that the Button Plant does not require fertilizer; however, the planting medium should be changed every year. It looks great as a hanging basket but also as a fitted plant.

Furthermore, this plant requires warm, humid conditions, so water it, when the top soil begins to dry this plant, is drought resistant and requires simply well-draining soil.

3. String of Beads

Senecio Herreianus, also known as String of Beads, is an unusual succulent with dangling stems of oblong, bead-like foliage, each with a straight, semi-translucent line extending to its tip that aids photosynthesis.

– Features

The string of beads is a plant that’s endemic to South West Africa, and the flowers appear as little, white fuzzy daisies on long, thin stalks.

The string of Beads houseplants require space to trail and are ideal for hanging pots or flowing from shelves. It is related to Senecio Rowleyanus, often known as String of Pearls. Some leaf loss is unavoidable for this plant; nonetheless, they are rapidly growing plants that rebound quickly.

String of Beads

– Growth Requirements

This plant is drought resilient and has the ability to retain water in its foliage. For propagating String of Beads, enable the soil to completely dry out between waterings. Remember not to water the plants too much or allow them to sit damp. In the summer, a room temperature of seventy-five degrees Fahrenheit is ideal.

Cold winter temperatures of about fifty degrees Fahrenheit will aid in plant health and blossoming. The Senecio Herreianus thrives in somewhat more humid conditions or with an occasional sprinkling and does well in ordinary household humidity.

During the warmer months, a dilute solution of mixed fertilizer one time a month might be quite promising. The string of Beads is a rapidly-growing plant with a maximum length and height of roughly three feet.

If they get too long or straggly, just cut them to the appropriate length. This plant is somewhat harmful if consumed, therefore retain it away from kids and pets and do not allow them to ingest it. Revealing this plant to direct sunlight during the day must be avoided, however, some early or late afternoon exposure would be beneficial.

4. String of Tears

The string of tears is another name for Senecio Citriformis. It is a cute houseplant for a new gardener that takes little care and grows quickly. This one-of-a-kind evergreen succulent is endemic to South Africa and has teardrop-shaped leaves that tip vertically.

– Features

The leaves of the tear are gray and green as they show their veins. This winter species belongs to the family Asteraceae and can grow to three inches tall.

This gorgeous shrub is strong, grows quickly, and produces tiny clusters of Creamy-yellow blooms from late summer through winter.

String of Tears

– Growth Requirements

You can grow string of tears properly by hydrating it once each two weeks and providing additional care. To avoid overwatering, wait until the soil is one-half inch dry until watering again. Watering should be limited to once a month throughout the winter season.

The String of Tear shrub prefers well-drained soil. When growing indoors, it is necessary to utilize a container that has at least two drain holes at the bottom. Senecio Citriformis may tolerate temperatures as low as twenty-three degrees Fahrenheit over brief periods of time.

This unusual plant needs complete sun to light shade all year for high leaf production. It should be shielded from direct sunlight during the summer. Stem cutting is the best way to propagate String of Tears. This method not only saves time and effort but also makes use of plucked stems.

5. Happy Bean

Peperomia Ferreyrae belongs to the big plant genus Peperomia and is also referred to as the Pincushion Peperomia or Happy Bean.

– Features

The Peperomia Ferreyrae is a periodic epiphyte quasi-plant species native to South America that looks extremely different from many other peperomia species. Their look does not appear to be connected to other peperomias with rounder leaves, but they are.

– Growth Requirements

Whorled, peapod-shaped leaves that are tightly windowed at the top grow on thick, occasionally tall semi-succulent stems. When the plant grows, the stems grow tall. The plant grows bushy and erect.

Training its development may be necessary, since otherwise, branches full of slightly curved leaves grow in an unpredictable form “bent and twisted,” although freestyle growing might suit your growing style.

Happy Bean

When observing a lanky-stemmed Peperomia Ferreyrae, a little bushy kind can really appear like a distinct plant, however, the leaves are identical which could be the only way to discover at first that they’re the same plant.

They, like other peperomias, require similar care to other succulents. Most temperate-zone homes should have adequate conditions to support the plant.

The importance of humidity and light, as well as preventing overwatering, cannot be overstated. The plant will not grow if there is insufficient light. Under watering will result in withering while overwatering will result in plant rot.

Water this plant only when the soil is dry, and then thoroughly, however, during the winter, there is substantially less water. Watering less is preferable to overwatering since the disadvantages of less irrigation are readily remedied.

This species grows well in greenhouses, conservatories, windowsills, and bright light excluding direct sunshine is preferred, yet a moderate quantity of direct sunlight may not be harmful.

6. Donkey Tail

Sedum Morganianum, often known as the Burro’s Tail or Donkey Tail, is a flowering plant endemic to southern Mexico in the Crassulaceae family.

This plant has been discovered in the wild in two ravines in central Veracruz, Tenampa county, in eastern Mexico, and on steep volcanic rock cliffs in the Tropical Woodland Forest zone.

– Features

In summer, it is a juicy perennial with trailing branches up to 24 inches tall, thick blue-green leaves, and apical pink to red flowers.

the reason why this plant looks like peas is how its leaves are arranged as they are circles filled with sap, place one after the other as it follows a trail.

Donkey Tail

– Growth Requirements

It should be considered a micro-endemic species due to its limited geographic range. In temperate climates, the lowest temperature is around 42 degrees Fahrenheit. This plant is commonly grown as a potted plant in a hanging pot with trailing stems that dangle vertically.

It thrives well either outdoors or inside, in bright light but not in high heat. For vigorous growth and improved leaf coloring, cultivate the plant in full sunshine. It needs constant, moderate irrigation all year, except during the winter when it ought to be watered seldom.

However, be mindful that the excess of water can quickly destroy the plant. When handled, the leaf attachments are exceedingly sensitive and leaves easily snap off the stem.

The leaves will remain alive for several days, and roots will sprout within a few nights, especially if the area is damp. Individual leaves will grow into plants that are inches long. This plant has a visible wax covering on its stems and leaves.


There are not many plants that look like peas or peapods but the ones that do are all on this list as you have seen already. To summarize the main topics of this list,

  • There are various plants that you can grow in hanging pots such as the String of Pearls or the String of Beads inside your house.
  • Plants such as the Happy Beans are suitable for floor pots rather than hanging containers but if you want you can grow them there with proper maintenance.
  • The string of Tears or Donkey Tail are plants that not only look like peas but also ones that you can grow all year round and in extreme weather conditions too.

So, which one of these peas or peapods-lookalike plants are you planning to grow in your garden?

5/5 - (18 votes)
Evergreen Seeds