Propagate philodendron birkin plants is a task that you can do it yourself as you have the correct sequence of doing so. Not only is propagating your plants a real achievement, but it is also one of the best things to do when looking to get started in gardening.

How To Propagate Philodendron Birkin

Since this attractive plant is one of the best varieties to get started on, you will practically fall in love with cultivating. Read this article so you know how to accomplish the matter in a swift way and keep it thriving.

How To Propagate a Birkin Philodendron From Cuttings?

To propagate a birkin philodendron from cuttings you must first choose a healthy plant, and sanitize the cutting tools. After that, cut the stems, place them in a good source of light, and ensure that the water needs are provided in an efficient way.

No plant will grow from a single leaf placed in soil or a jar of water; that is why you need to be careful about the growth, as it requires soil instead. The structure and information required to create new plants are found in nodes, which are brown clusters that surround the plant’s stem.

1. Choose Healthy Plants

Using stem cuttings to propagate this plant is one of the easiest methods to follow, which is why we put it at the top of our list. As always, you want to ensure that the plant you will use for the philodendron birkin cuttings is healthy and happy.

Choose Healthy Plants

When picking a healthy mother plant, it will make the entire process much easier and allow you to have a more effortless experience with philodendron plant care. In the long run, you will not encounter different issues such as the development of illnesses.

2. Sanitize Your Cutting Tool

You can use rubbing alcohol to disinfect scissors or pruning shears, ensuring no bacteria are transferred to the fresh Philodendron birkin. If germs do happen to come in contact with the new plant, it could cause issues and make the plant sprout poorly.

These are some common problems new gardeners face and can be avoided easily. Always follow a sanitary and clean care guide, because the blade you cut with may have been contaminated with a bacterium or a disease, and you wouldn’t want to begin the cut with an unfortunate start.

3. Cut The Stems

Now, cut one of the stems using a sharp tool like a knife or cutter, and you must ensure that this region of your Birkin contains at least one node. The roots would stick out from this junction in the stem, and that is how you know the right spot.

If possible, select a portion of the plant that includes aerial roots because this will result in a more mature plant and rapid multiplication. At this point, you can decide to use a rooting hormone, and doing so can help speed up root growth in new cuttings and boost its maturation.

Technically, Philodendron propagation requires a tiny portion of the stem, no more than an inch. You can create a new plant of philodendron birkin in water if the cutting has a node, a bump on the branch where roots or leaves can develop. This philodendron birkin node will help kickstart new growth and facilitate successful propagation, which is an indicator that will show you how your task was managed and accomplished.

4. Place It in Water

Now, place the roots in water, and make sure that they would grow in this medium because the cuttings must establish their roots. Changing the water in your propagation station every few days is crucial for optimal growth.

Placing fresh water would prevent the medium from growing bacteria, stagnating, and causing a poor stench. Introduce your cuttings to the soil. You can pot your cuttings into the philodendron birkin soil after the roots are longer than a few centimeters. To help with drainage and aeration, we advise using a premium soil mix.

We need to eliminate any potentially rotting leaves because this procedure requires soaking the cutting in water for a while. Ensure no leaves touch the water by carefully removing them from the lower portion of your cutting.

5. Locate the Cuttings Near Good Light

To establish the roots note that the cutting needs a lot of bright indirect light. The stem cutting won’t effectively root if exposed to too much direct sunshine.

On another note, as adequate light is necessary for photosynthesis, the intensity shouldn’t be too low, because now is the time to see the plant grow better. Light monitors can be used to evaluate light levels, and grow lights can be used if the light is too low.

How To Propagate Birkin From Division?

To propagate birkin from division, you must find the potential offshoots first, and then remove the plant from its container. Divide the right pieces, place them in fresh soil, or water, and make sure you would provide it the right care requirements.

1. Find Potential Offshoots

If your birkin has several offshoots, it will be quite visible while searching for a piece of the plant to divide. Growth will come from the center of each segment, and they will be entirely distinct, which means you must be very detailed when you try to find the right shoot to perform this task with.

2. Remove The Plant From Its Container

After determining the different parts of the plant, remove the plant from the pot so that you can divide its root system. Shake off the potting soil from the plant’s roots by carefully lifting it out, you can even use a brush to remove the soil and debris.

Remove The Plant From Its Container

Run your fingers through the roots to begin to divide them; this will help to loosen the soil and make things easier for the upcoming steps. In this case, you should also make sure that the plant’s roots are managed with care, because the roots may break if they aren’t carefully handled.

3. Divide The Pieces

If they are difficult to untangle, you might need to clip out the odd root, but you should be able to pull the parts apart carefully. To ensure successful propagation, ensure that each area of the plant has a sizable portion of the root system.

It is acceptable to cut around the plant a bit to separate it. Always use shears to separate the plant’s sections rather than tearing them apart, as doing so can easily cause damage.

4. Put In Fresh Soil or Water

Choose whether to put the offshoot directly into the mix or back into the original pot with the mother plant. Note that this matter is one that depends on the cutting size and the root system’s maturity.

The branch will be fine growing in a soil mix if its roots are already very developed. We advise putting the roots into the water as a middle stage if you believe they need to grow more, and so that when they establish, they would do so from the center and develop further.

5. Maintain Standard Care

You can take care of your cutting if it is now in fresh soil by giving it the same attention as your other Philodendron Birkin. If it is initially in water, you should change the water every few days and repot it into soil mix once the roots have slightly developed.

Maintain Standard Care

On another note, this genus enjoys tropical climates; thus, the Birkin will thrive under higher humidity levels, which means that you can mist it, but not in a frequent way. This approach is popular with specific individuals, but most gardeners don’t think it works well; moreover, consistently wet leaves from routine plant misting might lead to rot.

This is the type of plant that requires at least 12 hours of direct, strong sunlight daily in the beginning phase. Ensure it doesn’t receive more than three to four hours of direct morning sunshine.

Generally speaking, birkins cannot tolerate direct solid sunlight, ideally, placing them on east or west-facing is recommended by most gardeners, or filtered light, so that it wouldn’t hit them in a harsh way. Without this, your plants could go into a case of philodendron birkin revert.

How To Propagate by Air Layering Philodendron Birkin?

To propagate by air layering the birkin, you should choose the ideal stem, and cut it vertically making sure you keep the cut open. Then, connect them to some peat moss, and now you should plant the new roots, and ensure to give it the right care.

1. Choose the Ideal Stem

You can prolong new growth through air layering while producing a new plant without shocking your old plant. Even though this technique is a little more difficult than water propagation, it has remarkable, rapid results that seasoned gardeners will value. Choosing the plant’s healthiest stem is crucial for air stacking. This will guarantee ideal development and hasten recovery after propagation.

2. Cutting Vertically

Once you’ve selected the right stem, make a vertical cut two to three inches along the stem with a sterile instrument or knife. Be sure that the blade penetrates the stem halfway, and also, remember that your tools must be well sanitized, because this cut is the main place where the propagation will diverse out.

3. Keep That Cut Open

The incision should then remain open so that roots can develop. To accomplish this, insert a toothpick into the cut’s center to hold it open. This is the section where the roots will have a successful shoot, as they develop out of the edges and get out.

4. Connect the Peat Moss

Here, you should begin by wetting your peat moss. Then, wrap the stem where the cutting is with the moist moss. Ensure that the moss is always damp but not overly soggy. Extremely soggy moss will most likely promote the growth of germs.

Grab your plastic wrap out and wrap it tightly around the steaming moss. This method keeps the peat or sphagnum moss from drying out too rapidly, and the incision is shielded from dirt and bacteria.

5. Planting New Philodendron Birkin

You should notice new roots emerging from the moss after a few weeks of tender care and patiently waiting. When you see this sign, it’s time to remove your clipping. Trim the cutting below the moss and roots, then carefully insert it into your new soil mixture.

Planting New Philodendron Birkin

To avoid dying your propagating Birkin and hurting the cutting and roots, it’s crucial to be highly delicate throughout the process.

6. Provide the Right Care

Philodendron birkin care is what will get you those healthy new propagated plants. Most importantly, medium to bright indirect light is crucial in making sure these plants grow super healthily.

A solid straight stem resembling a little tree can grow to about three feet tall, provided it receives enough bright indirect light. Although the plants might take approximately ten years to mature fully, large specimens are rare. Some philodendron birkin rare varieties include rojo congo.

These indoor plants are easy to look after. Typically, to make a philodendron birkin grow, plant care includes access to bright, filtered light, stable watering, and high-quality soil mix. Light requirements are essential for this plant.

In their natural settings, most philodendron species can effectively grow on or up other trees because of their aerial roots. Trailing varieties can use these roots in the home to sustain themselves or climb a trellis or moss pole. If they do develop, you can do nothing but appreciate the unusual appearance of Philodendron birkin aerial roots.

They can also be positioned in the soil to help the plant take root and maintain itself, or they can be modified to allow the plant to climb. Using a pair of sharp pruners, you can remove them from the main stem if you don’t like the way they look.

7. Be Sure To Tackle the Diseases

Brown spots are more common in overly wet plants, and other issues can also be a case of common pests like spider mites. If your Birkin starts to yellow in the leaves, you may want to reevaluate your watering schedule. Because this is an easy-going plant variety, over-watering is one of the most common issues when repotting philodendron plants. A good, easy-to-care-for variety also includes Philodendron Brasil.

If you have visible scattered yellow leaves, this may indicate overwatering. Your plant isn’t getting enough light to compensate for the amount of water you’ve given, or you’re watering it too regularly. Always check the moisture level of the potting mix by feeling it before watering. A philodendron birkin yellows usually out of water concerns.

Yellowing leaves are typically merely a one-time error, and if you let your plant dry out more, it will probably be okay. If this is not fixed, the next step is root rot, because the roots have become vulnerable as they are new and still growing.  It’s merely an old leaf if there are one or two yellowing leaves at the base of your plant. As new leaves emerge, the old ones on this plant will fall off.


You are now fully set to begin your Philodendron birkin propagation techniques. With this guide, propagating the philodendron birkin will never be easier. To recap some of the main points, remember:

  • Philodendron birkin propagation in water is one of the best ways to grow new plants, but make sure the leaves don’t come in contact with the water.
  • You can also accomplish the task through the soil is a good option for those more confident in their gardening skills.
  • The Philodendron birkin division is also an ideal option for more advanced gardeners. Philodendron birkin pups are what will help you achieve optimum in this method.

These expert techniques of propagating philodendron birkins should help you grow your best plants yet. So, grab your tools and start growing.

5/5 - (14 votes)
Evergreen Seeds